product description

　　KP301A 4.5th generation mechanical and intelligent ion air gun is newly developed by Kappel to eliminate static electricity on the surface of the object.

　　The KP301A 4.5th generation mechanical and intelligent ion air gun is a hand-held static eliminator that is commonly used to eliminate dust attracted by static electricity. The KP401A 4.5th generation mechanical and intelligent high voltage power supplies that require compressed air and 4.6KV are available.

　　The KP301A 4.5th generation mechanical and intelligent ion air guns generate a large amount of airflow with positive and negative charges, neutralizing the charge on the object. When the surface of the object is negatively charged, it will attract the positive charge in the airflow. When the surface of the object is positively charged, it will attract the negative charge in the airflow, so that the static electricity on the surface of the object is neutralized and eliminated. The purpose of static electricity.

　　KP301A 4.5th generation mechanical and intelligent ion air guns are used in electronics, LED optoelectronics, printing, packaging, coating production lines and other industries.

　　Features

　　1, smart and modern, beautiful appearance, fine production, innovative design.

　　2, the production of insulating materials, sensor-free and built-in line design, high safety performance.

　　3, in the rapid static electricity, dust removal effect is good, low voltage balance.

　　4, compact, simple and flexible.

　　5, air gun has a good grounding protection.

　　Technical Parameters

　　Test Results

* The test instrument shall use the test result of ME268A electrostatic tester.

　　* The test is based on IEC-61340-5-1 A.6.

　　* Tested data may vary due to changes in temperature and humidity around.

　　Safety instructions

　　1. Please read the instruction manual carefully before installing and using this equipment.

　　2. The entire equipment must be grounded reliably during use, otherwise it may easily lead to the burning of the equipment.

　　3. The source of the gas to enter the air gun must be clean air after filtration of moisture, grease, and fine dust.

　　4. It is forbidden to touch the high-voltage ion needle during the working process of the air gun.

　　5. It is difficult to use the device in a humidity environment of >70%.

　　6. It is forbidden to use this equipment in flammable and explosive environments.

　　7, internal maintenance and repair must be carried out by professionals.

　　8. When using the air gun, please handle it gently, and do not throw it at random to the ground table so as not to affect the life of the air gun.

　　Installation and use

　　1, installation and use of guidance:

　　(1) The air gun needs to be equipped with a KP401A 4.5th generation mechanical and high voltage power supply with an operating voltage of 4.6KV.

　　(2) Insert the end of the air gun connector into the high voltage output jack of the high voltage power supply, turn the ground coil of the air gun connector to the grounding post on the outside of the high voltage power supply in a clockwise direction, and confirm that the ground is good. , Connect the gas source connector with Ф8mm hose to the air source generator.

　　(3) Insert the end of the power cable end into the black socket of the high voltage power supply, and plug the other end of the power cable into the power outlet with a ground wire.

　　(4) Turn on the device switch that connects the air gun air source, and then turn on the power switch of the high-voltage power supply. The hand-held air gun presses the pinch plate on the gun body to point where you need to remove the electrostatic dust, and you can eliminate static electricity and Dust removal.

　　2，Dimensions:

　　maintenance

　　The KP301A 4.5th generation mechanical and intelligent ion air guns are targeted for low maintenance. In order to ensure the good performance of the product, it should be cleaned and maintained in time according to the use environment and the required electrostatic protection requirements. That is: using an electrostatic brush, clean cloth, and cotton swab to distill anhydrous alcohol to gently clean the high-voltage ion needle. Carbon deposits, its performance will be significantly improved.

　　Note:

　　A. It must be operated 10 minutes after the power is turned off.

　　B. When the air gun is in use, when the needle tip has accumulated dust or white products, it must be cleaned. You can choose to use an electrostatic brush, dust-free cloth, and a cotton swab to distill anhydrous alcohol to gently remove the product from the high-voltage ion needle. Carbon material.

　　C. After cleaning, you must wait for the alcohol to completely evaporate and then work on electricity. Do not use any other organic solvent to clean the air gun.

　　Accessories

　　1, manual 2, warranty card certification.

　　Product Warranty and Service

　　1. KP301A The 4.5th-generation mechanical and intelligent ion air gun has passed the strict test and inspection and aging treatment before leaving the factory, and its performance fully meets the relevant indicators marked in the instructions for use.

　　2. Kappel makes the following commitments to users: Within one year from the date of purchase, the company will repair or replace any parts that have been inspected by the company for defects. However, this commitment does not apply to the following situations: equipment is misused and installed; negligence during use, damage caused by accident; self-modification, disassembly, or repair by other service departments not authorized by the company. The company does not assume any obligation and the related responsibility of the product user. Except for the repair or replacement of components within this regulation, any product sold by the company is still responsible for the maintenance of the product without labor costs to protect the interests of the customer.