product description 

　　KP104B 5th generation intelligent horizontal ion blower is a new intelligent device developed by Kappel to eliminate surface static electricity.

　　The KP104B 5th generation intelligent horizontal ion blower generates a large amount of airflow with positive and negative charges, neutralizing the charge on the object. When the surface of the object is negatively charged, it will attract the positive charge in the airflow. When the surface of the object is positively charged, it will attract the negative charge in the airflow, so that the static electricity on the surface of the object is neutralized and eliminated. The purpose of static electricity.

　　KP104B 5th generation intelligent horizontal ion fan is provided with an axial fan to provide wind power. The size of the wind can be adjusted by touch buttons or remote control.

KP104B 5th generation intelligent horizontal ion fan is used in electronics, medicine, hard disk manufacturing, optoelectronics, wafer microelectronics and other industries.

　　Features 

　　1, smart modern, meticulous process design, beautiful outside the United States, well-made.

　　2, ion current coverage area.

　　3, remote control, touch dual control power start, adjust the size of the wind, cold, warm air automatically switch.

　　4, with high pressure fault wind alarm alert function.

　　5, in addition to static electricity, low balance voltage, high safety performance.

　　6, air outlet guard grid can be disassembled, easy to clean shot needle.

　　Technical Parameters　

　　Test Results　

* The test instrument shall use the test result of ME268A electrostatic tester.

　　* The test is based on IEC-61340-5-1 A.6.

　　* Tested data may vary due to changes in temperature and humidity around.

Safety instructions

　　1. Please read the instruction manual carefully before installing and using this equipment.

　　2. The entire equipment must be grounded reliably during use, otherwise it may easily lead to the burning of the equipment.

　　3, air out, entrance guard grid can not insert things.

　　4. It is difficult to use the device in a humidity environment of >70%.

　　5. It is forbidden to use this device in flammable and explosive environments.

　　6, internal maintenance and repair must be carried out by professionals.

Installation and use

　　1, installation and use of guidance:

　　(1) The “L” frame is fixed on both sides of the fuselage with the matching M6 knob and tightened.

　　(2) Select the best location for extinction, fix the fan on the machine and adjust the extinction angle.

　　(3) Insert the end of the power cable end into the black socket on the back of the fan. Plug the other end of the power cable into the grounded power socket and open the rocker switch on the black socket on the back of the fan.

　　(4) Use the touch or remote control to turn on the power switch, the power switch light is on to show that the fan works normally, select the deceleration wind or accelerate the wind touch button (remote control) to adjust the appropriate wind, transport the positive and negative air ions generated at the launch needle, go to And the surface of the object is electrostatic. If the hot air function is required, the switch button with hot air can be selected.

　　2 Dimensions:

　　3, installation method diagram:

　　4, fault solution:

　　5, remote control function:

Note: The remote control is a consumable item and is not covered by the warranty.

　　maintenance 

　　The KP104B 5th-generation intelligent horizontal ion blower is aimed at maintaining low maintenance.

Maintenance items: clean shooting needle, ion balance correction, static electricity correction. Within a week at least for the launcher

Once clean, regular calibration of ion balance and static elimination time. To ensure the normal operation of the ion fan.

　　1. Cleaning of the transmitter: Clean the emitter needle of the transmitter, open the fan air outlet guard grid with static brush pen, clean cloth, cotton swab to draw anhydrous alcohol to gently clean the oil or carbon deposit on the launch needle. Its performance will be significantly improved.

　　Note: 

　　A. It must be operated 10 minutes after the power is turned off.

　　B. After cleaning, you must wait for the alcohol to completely evaporate and then work on electricity. Do not use any other organic solvents to clean the emitter.

　　2. Air outlet and air inlet guard grid cleaning: Air outlet and air inlet guard grids should be kept clean To prevent blocking air flow, you can clean it with static brush or compressed air.

　　3. Ion balance test: Measured using a plate load monitor or ion meter to measure the degree of ion balance (residual voltage).

NO Problem Possible Cause Solution

　　4. Static elimination time test: Use an electrostatic analyzer or load monitoring to measure the static elimination time.

　　5, calibration KP104B 5th generation intelligent horizontal ion fan, the output of the ion volume design is stable and fixed. Due to fluctuations, environment, air, dry humidity and other factors, the deviation of ion balance (residual voltage) may be formed. Offset standard: 0V ± 10V.

　　Accessories

　　1. Manual 2. Warranty card certificate 3. Test report 4. Power cable 5. Static brush 6. A pair of “L” frames 7. A pair of M6 knob 8. Remote control.

Product Warranty and Service

　　1. KP104B The 5th generation intelligent horizontal ion blower undergoes rigorous testing, aging and processing before leaving the factory, and the performance fully meets the relevant indicators marked in the instructions for use.

　　2. The Kappal brand makes the following commitments to its users: Within one year from the date of purchase, the company repairs or replaces any parts that have been inspected by the company for defects. (The remote control is a consumable product and is not covered by the free warranty service. Inside). However, this commitment does not apply to the following situations: equipment is misused and installed; negligence during use, damage caused by accident; self-modification, disassembly, or repair by other service departments not authorized by the company. The company does not assume any obligation and the related responsibility of the product user. Except for the repair or replacement of components within this regulation, any product sold by the company is still responsible for the maintenance of the product without labor costs to protect the interests of the customer.