product description

　　KP502A 4.5th-generation mechanical and intelligent ion wind bar is the latest development and production of Kappel company to eliminate static electricity on the surface of the device.

　　The KP502A 4.5th generation mechanical and intelligent ion wind bar is a static elimination device that is commonly used to eliminate electrostatic adsorption dust. The KP401A 4.5th generation mechanical and intelligent high voltage power supplies that require compressed air and 4.6KV are available. The length can be customized according to the customer's requirements.

　　KP502A 4.5th generation mechanical and intelligent ion wind bar can produce a large number of positive and negative charge airflow, which can neutralize the charge on the object. When the surface of the object is negatively charged, it will attract the positive charge in the airflow. When the surface of the object is positively charged, it will attract the negative charge in the airflow, so that the static electricity on the surface of the object is neutralized and eliminated. The purpose of static electricity.

　　KP502A 4.5th generation mechanical and intelligent ion wind bar is widely used in electronics, printing, packaging, coating production lines, etc.

　　industry.

　　Features

　　1, beautiful appearance, fine production, innovative design.

　　2, strong and durable, strong wind, suitable for a variety of harsh working environment.

　　3, in the rapid static electricity, dust removal effect is good, low voltage balance.

　　4. Special bar-shaped notches for rod body, the mounting bolts can be moved and convenient.

　　5. The net yarn effectively prevents the fingers from directly touching the high-voltage ion needle and causes the danger of high-voltage electric shock.

　　6, wind bar has a good grounding protection.

　　Technical Parameters

　　Test Results

　　* The test instrument shall use the test result of ME268A electrostatic tester.

　　* The test is based on IEC-61340-5-1 A.6.

　　* Tested data may vary due to changes in temperature and humidity around.

　　Safety instructions

　　1. Please read the instruction manual carefully before installing and using this equipment.

　　2. The entire equipment must be grounded reliably during use, otherwise it may easily lead to the burning of the equipment.

　　3. The source of gas that enters the wind bar must be clean air after filtration of moisture, grease, and fine dust.

　　4. It is forbidden to touch the high-voltage ion needle during the working process of the wind bar.

　　5. It is difficult to use the device in a humidity environment of >70%.

　　6. It is forbidden to use this equipment in flammable and explosive environments.

　　7, internal maintenance and repair must be carried out by professionals.

　　Installation and use

　　1, installation and use of guidance:

　　(1) Select the optimal installation position of the wind bar. Move the bolt in the slot of the stick body to fix the wind bar on the device.

　　(2) The wind bar needs to be used with a KP401A high voltage power supply with an operating voltage of 4.6KV.

　　(3) Insert the end of the wind bar connecting cable into the high voltage output jack of the high voltage power supply, turn the grounding coil of the wind bar connecting cable to the grounding bar outside the high voltage power supply, and confirm that the ground is good after rotating clockwise. , Connect the air source connector with Ф8mm hose to the air source generator.

　　(4) Plug the end of the power cable end into the black socket of the high voltage power supply, and plug the other end of the power cable into a power outlet with a ground wire.

　　(5) Turn on the device switch that connects the air source, and then turn on the power switch of the high voltage power supply to eliminate static electricity and dust.

　　2，Dimensions:

　　3, installation method diagram:

　　maintenance

　　The KP502A 4.5th generation mechanical and intelligent ion wind bar is targeted at low maintenance.

　　In order to ensure the good performance of the product, it should be cleaned and maintained in time according to the use environment and the required electrostatic protection requirements. That is: using an electrostatic brush, clean cloth, and cotton swab to distill anhydrous alcohol to gently clean the high-voltage ion needle. Carbon deposits, its performance will be significantly improved.

　　Note: 

　　A. It must be operated 10 minutes after the power is turned off.

　　B. When the wind bar is in use, when the needle tip has accumulated dust or white product, it must be cleaned. You can choose to use an electrostatic brush, clean cloth, and cotton swab to distill anhydrous alcohol to gently remove the product on the high-voltage ion needle. Carbon material.

　　C. After cleaning, you must wait for the alcohol to completely evaporate and then work on electricity. Do not use any other organic solvent to clean the rod.

　　Accessories

　　1, manual 2, warranty card certification.

　　Product Warranty and Service

　　1. The KP502A 4.5th generation mechanical and intelligent ion wind bar undergoes rigorous testing, aging and processing before leaving the factory, and its performance fully meets the relevant indicators marked in the instructions for use.

　　2. The Kappal brand promises to the user as follows: Within one year from the date of purchase, the company will repair or replace any parts that have been inspected by the company for defects. However, this commitment does not apply to the following situations: equipment is misused and installed; negligence during use, damage caused by accident; self-modification, disassembly, or repair by other service departments not authorized by the company. The company does not assume any obligation and the related responsibility of the product user. Except for the repair or replacement of parts within this regulation, any product sold by the company is still responsible for the repair of the product without labor costs to protect the interests of the customer.